With a list of enriched regions, you can now identify recurring patterns or motifs in these regions. Transcription factors bind sites throughout the genome, but each has a characteristic sequence it binds - a consensus sequence that appears in most of its binding sites. By searching for binding site motifs, you can determine the consensus sequence for a transcription factor and predict potential binding locations throughout the genome that may not have been found in your experiment.
Partek Genomics Suite detects de novo motifs using the Gibbs motif sampler (Neuwald et al., 1995) and can search for known transcription factor binding sites using a database such as JASPAR.
Select Motif Discovery from the Peak Analysis section of the ChIP-Seq workflow
Select Discover de novo motifs
Select OK
The Detect Motifs dialog will open to allow you to configure the search (Figure 1).
Figure 1. Configuring search parameters for de novo motfis
Select 1/p-value_filtered from the Spreadsheet with genomic regions drop-down menu
Set Number of Motifs to 1
Set Discover motifs of length to 6 bp to 16 bp
Set Result file to Motifs
Select OK
If you have not previously downloaded the reference genome on your computer, you may be asked if you would like to download the .2bit reference genome. If prompted, select Automatically download a .2bit file then select OK. If Partek Genomics Suite cannot connect to the internet, this option may not be available. If not, you will need to download the .2bit file from the UCSC Genome Browser and import it by selecting Manually specify a .2bit file and choosing the downloaded .2bit file. The reference genome map is required to determine which genes overlap the enriched peak regions and to display the aligned sequences in the Genome Viewer.
A motif visualization tab, Sequence Logo, will open and two spreadsheets will be generated. One spreadsheet, motifs (Motifs), contains information about the motif. The other, instances (Motifs_instances.txt), lists the genomic locations of the motif.
The Sequence Logo tab (Figure 2) opens after motif detection and displays the most significant motif found in the regions listed in the source spreadsheet_._
Figure 2. Viewing the binding site for NRSF. Use the blue arrows to cycle through views of all motif found (if there are more than one). Select Reverse to view the reverse complement sequence.
In this case, the motif finder discovered a motif in the NRSF-enriched regions that is 16 base pairs in length. The height of each position is the relative entropy (in bits) and indicates the importance of a base at a particular location in the binding site.
The title CT.TCC..GGT.CTG. is the consensus sequence for the sequence logo. Dots represent positions that contain more than one significant base across all reads in the motif. The dots can be replaced with characters representing the possible bases at each location by selecting Show nucleotide codes. A description of the IUPAC nucleotide codes is available at the UCSC Genome Browser.
To view the reverse complement of the motif, select Reverse.
The motif information spreadsheet (Figure 3), Motifs, lists the information about all motifs discovered during de novo Motif Detection. This includes five columns describing each motif.
Figure 3. Viewing the Motifs spreadsheet
1. Counts gives the summed counts for each base call across all occurrences of the motif in the region list as {A, C, G, T}
2. Consensus Sequence gives the consensus sequence of the motif in IUPAC nucleotide codes
3. Motif ID gives a unique ID to each discovered motif using its row in the Motifs spreadsheet
4. Log Likelihood Ratio scores the relative likelihood that the pattern did not occur by chance, with larger numbers indicating that it is less likely to have occurred by chance
5. Background frequency (A,C,G,T) gives the frequency of each of the bases in all the sequences of that motif
You can bring up the Sequence Logo visualization of a listed motif by right-clicking on the row header and selecting Logo View from the pop-up menu.
The _instances (_Motif_instances) spreadsheet (Figure 4) is a child spreadsheet of the Motifs spreadsheet. It details all the locations of the motif(s) detected in the enriched regions. Each row lists a putative binding site for a motif. The columns give detailed information about the putative binding sites.
Figure 4. Viewing the instances spreadsheet
1-4. chromosome, start, stop, strand give the position
5. Motif ID gives the identity of the motif
6. instance gives the sequence of this instance of the motif
7. score gives the log ratio of the probability that this sequence was generated by the motif versus the background distribution. A higher number indicates a better chance that the sequence is an instance of the motif.
Select Motif discovery from the Peak Analysis section of the ChIP-Seq workflow
Select Search for known motifs
Select OK
Search for known motifs will search the JASPAR database for motifs that are over-represented in the list of sequences in the significant regions list. The JASPAR database will download automatically if needed during the Search for known motifs step. Downloading the JASPAR database will create a spreadsheet in your experiment named JASPAR.txt that contains all of the species-specific motifs in the database. To visualize the motifs, right-click on a row in the JASPAR.txt spreadsheet and select Logo View.
Before Search for known motifs runs, we need to configure the search (Figure 5).
Figure 5. Configuring a search for known motifs in the JASPAR database
Select 1/p-value_filtered (p-value filtered.txt) from the Choose Region Spreadsheet drop-down menu
Select Search using motifs specified in: for Choose Motifs to Search
Set Search using motifs specified in: to 2 (JASPAR.txt) using the drop-down menu
Set Search for to All Motifs using the drop-down menu
Set Sequence Quality >= to 0.7
Name the result file MotifSearch
Select OK
Because we are searching for around 1200 motifs, the process will take some time to complete. Progress is displayed in the progress bar in the lower left-hand side of the Search for Motif(s) in Sequences dialog (Figure 6).
Figure 6. Progress in the motif search will display in the progress bar
Two spreadsheets are created, similar to the spreadsheets in the de novo motif discovery, the motif_summary (MotifSearch) spreadsheet (Figure 7) and the motif_instances (MotifSearch.instance) spreadsheet.
Figure 7. Viewing the results of motif search
In the MotifSearch spreadsheet, each motif used in the motif search is shown. The columns detail the results of the search for each motif that was found in the reads.
1. Motif this is the name or ID of the motif
2. Probability of Occurrence gives the probability of detecting a false positive for this motif in a random DNA sequence
3. Expected Number of Outcomes gives the Probability of Occurrence multiple by the summed length of the reads
4. Actual Number of Occurrences gives a count of sequences that match the known motif in the reads
5. p-value is the uncorrected p-value (binomial test)
As you can see, REST, which is another name for NRSF, is near the top of the list as one of the most significantly over-represented motifs (Figure 7). This motif agrees with the motif found in the de novo motif detection step. Interestingly, other motifs appear a significant number of times in the ChIP-Seq peaks and may represent possible co-factors or regulators.
The motif_instances spreadsheet contains all instances of the motifs from the motif_summary spreadsheet in a format identical to the instances spreadsheet from de novo motif detection.
While the motif_instances spreadsheet contains every instance of every motif, it may be useful to create a spreadsheet with just instances of one motif or a select group of motifs. Let's do this for both REST motifs.
Select the motif_instances spreadsheet in the spreadsheet tree
Right-click the 5. Motif Name column
Select Find / Replace / Select... from the pop-up menu (Figure 8)
Figure 8. Finding all REST peaks (step 1)
Set Find What: to REST
Select By Columns for Search:
Select Only in column with 5. Motif Name selected form the drop-down menu
Select Select All (Figure 9)
Figure 9. Selecting all REST instances in motif_instances spreadsheet (step 2)
This finds and selects every instance of REST in column 5. Motif Name.
Select Close
In the motif_instances spreadsheet the selected columns are highlighted.
Right-click on the first highlighted row visible; in this example, we see row 13196
Select Filter Include from the pop-up menu (Figure 10)
Figure 10. Filtering for selected rows
The spreadsheet will now include 2098 rows and a black and yellow bar will appear on the right-hand side of the spreadsheet (Figure 11). The black and yellow bar is a filter indicator showing the fraction of the spreadsheet currently visible as yellow and the filtered fraction as black.
Figure 11. Filtered motif_instances spreadsheet containing 2098 instances of the REST motifs
To create a spreadsheet that contains only the REST instances, we can clone the motif_instances spreadsheet while the filter is applied.
Right-click on motif_instances in the spreadsheet navigator
Select Clone... from the pop-up menu
Set the Name of resulting copy as REST
Select 1/p-value_filtered/motif_summary (MotifSearch) from the Create as a child of spreadsheet drop-down menu
Select OK
This creates a temporary spreadsheet rest from the filtered motif_instances spreadsheet. We can now save the new spreadsheet.
Select rest from the spreadsheet tree
Name the file REST
Select Save
We can now remove the filter from the source motif_instances spreadsheet.
Select motif_instances from the spreadsheet tree
Right-click the filter bar
Select Clear Filter
Neuwald, A. F., Liu, J.S., & Lawrence, C.E. (1995). Gibbs motif sampling: detection of outer membrane repeats (Vol. 4). Protein Science.
If you need additional assistance, please visit our support page to submit a help ticket or find phone numbers for regional support.
Select () from the command bar
